Hủy
Cloud Insights

All documents

Metal Cloud

FPT Security
Support
Billing
Billing
AI Marketplace
AI Studio
FPT AI Inference
AI Inference
AI Infrastructure
FPT Cloud Server
FPT Monitoring
FPT DevSecOps Services
FPT Integration
FPT Database Engine
FPT Cloud Backup & DR
FPT Storage
FPT Network
FPT Container
    Quick start
    Quick start
    Updated on 05 May 2026
    Print: Export: PDF

    Bare Metal GPUs servers are dedicated, single-tenant servers with 8 NVIDIA H100/H200 GPUs that can operate standalone or in multi-node clusters.

    Sign Up for an Account

    1. Access https://id.fptcloud.com/ and choose Sign up.
    2. Please check your Junk email folder if you don't see the confirmation email in your Inbox.
    3. Sign in to https://console.fptcloud.com/ to start using the Metal Cloud service.

    Create a Subnet

    A subnet is required to create and deploy your Bare Metal GPU server.

    1. Click on AI Infrastructure and select Subnet in the Sidemenu.
    2. Follow the detailed guide here.

    Create Bare Metal GPU Servers

    1. Click on AI Infrastructure and select Metal Cloud in the Sidemenu.
    2. Choose Create server and configure the server deployment.
    3. Two (02) FPT images for GPU and AI/ML are available; check the software dependencies here.
    4. You may select a Floating IP (Public IP) while creating the server to access it via the internet, or attach it later in the Network/Floating IP.
    5. Follow the detailed guide here.

    Access to Servers

    1. Configure Network ACL here to create an inbound rule that allows your Public IPs.
    2. SSH into the server with your SSH key or password as configured during creation.
    3. You can also set a Jump host for additional security settings. Follow the guide here.

    Notices

    • Please check the Tenant & Region after accessing the FPT Cloud Console. AI Factory is only supported in the Hanoi 2 (Vietnam) and Tokyo (Japan) regions.
    • You may change the default Network ACL, but ensure to set up other required rules for creating servers.
      Here is the default outbound rule for a Network ACL, which you can delete.
    Priority Type Protocol Port Destination Traffic Action
    100 ALL ALL ALL 0.0.0.0/0 ALLOW

    If you delete the above default rule, you need to add the following outbound rules to create and deploy the server:

    Priority Type Protocol Port Source Traffic Action
    1 HTTP TCP 80 0.0.0.0/0 ALLOW
    2 HTTPS TCP 443 0.0.0.0/0 ALLOW
    3 DNS (UDP) UDP 53 0.0.0.0/0 ALLOW
    • FPT sets the limitation (quota) for resource quantity according to your contracts/agreements. If you run out of resources, you cannot create new ones. Please contact your salesman or reach out to FPT Smart Cloud Support.
    © 2025 FPT Cloud. All Rights Reserved.